Process Equipment

SSI manufactures disc diffusers with compression molded membranes. Standard materials are EPDM and fluoroelastomer layered EPDM. Compression molding ensures that we produce a part with even specific gravity and uniform tear resistance. Other molding techniques such as injection molding produce similar looking parts, but the tear resistance of a compression molded part is multidirectional, whereas the tear resistance of an injection molded part tends to be unidirectional just like wood which has a grain.

There is an art to using just the right amount of plasticizer in an EPDM membrane. Use too much, or the wrong type, and emulsifying fats can leech plasticizer and cause shrinkage and increase hardness. Use too little, and the rubber loses its memory, bubble size increases

Membrane Diffusers
SSI has a great deal of experience experimenting with different types and amounts of plasticizer, as well as other components of formulated EPDM rubber, such as fillers and curatives, and we put this experience to work. Membrane perforation and surface charge are additional considerations. SSI perforates disc membranes from the inside out with specially shaped knives. This results in the smallest part of the perforation on the membrane surface where the bubble is released.

Mass Transfer Systems MTS

The MTS Multi-Aspirator is a portable aerator designed for basins up to 28 feet in depth. This aerator features efficient oxygen transfer, low installation costs, excellent mixing and minimal noise levels. This easy to install, freestanding aerator can be installed in new or existing basins . The stainless steel lifting harness makes it easily accessible, and it requires no anchors. The Multi-Aspirator optimizes aeration and mixing without aerosol formation, making it ideal for application in sludge holding tanks, aerobic digesters, storage tanks and equalization basins. Directional Jet Manifold Aerators The Mass Transfer Systems directional jet aerators are designed with jet aeration nozzles installed on only side of the liquid / air jet aeration manifold. This configuration is most applicable for round tanks, lagoons, and ditches where directional flow patterns can be achieved to aid in the mixing of the tank contents. Radial Jet Pod Aerators The Mass Transfer Systems radial jet pod aerators are designed with jet aeration nozzles installed around the circumference of an integral liquid / air pod body. This configuration is most applicable for smaller round and square tanks and sequence batch reactors where directional flow patterns are not desirable.

Delta Cooling Towers, Inc. offers a full line of High Density Polyethylene (HDPE) Storage tanks for remote sump applications with capacities from 200 to 10,500 gallons. These tanks are a unitary seamless engineered plastic design that Delta has been manufacturing since 1971 and have been very well received in both commercial and industrial applications.

Standard Features:

• Seamless Engineered Plastic (HDPE) Shell
• Corrosion Proof Construction
• Factory Assembled for Simple Installation
• 3 Year Shell Warranty
• Made in the USA

Amwell

AMWELL ® builds quality heavy duty front cleaned bar screens to your specifications in vertical or inclined designs in widths from 1.5 ft. to 7 ft. and depths to 30 ft in stainless steel or carbon steel construction. All models are powered by shaft mounted direct drives. Options include “pivot mounted design” for easy maintenance and more.

AMWELL ® paddle wheel flocculators provide engineers and water treatment facilities with well designed, well crafted, flocculator systems engineered for long life and minimal maintenance. Amwell flocculators are available in your choice of horizontal or vertical configurations for all water applications.

AMWELL ® telescoping valves give you control and dependability.

• 3” through 24” diameter valves
• Stainless steel wetted parts w/cast iron/steel operators
• Stainless steel wetted parts w/stainless steel operators
• Manually operated or motorized control
• Acme threaded rod or rack and pinion design
• Indicating or non-indicating
• Corrosion resistant

Material Resources Inc. has responded to a lack of adequate pipe supports for flanged valve and piping systems by introducing a cost effective and innovative line of adjustable pipe supports. The Standon Adjustable Pipe Supports are completely adjustable and come with an anchor-able base plate and collar that allows up to 4" of fine adjustment. Complete installation takes only five minutes and requires no threading or welding.

Developed in 1922 by Ralph L. Parshall for the United States Bureau of Reclamation, Parshall flumes are the most widely used type of flume for permanent flow monitoring installations. With wide flow ranges, resistance to submersion, simple flow meter calibration, and self-cleaning design, Parshall flumes are the first choice of many engineers and end-users.

Each weir box comes complete with a fixed weir plate, fixed inlet baffle (adjustable baffles also available), inlet and discharge areas, and end connections (where required).

The molded one-piece construction provides high strength at a low cost and eliminates the joints and seams that paneled constructed buildings With all stainless steel hardware and no wood or metal structural members, TRACOM shelters are designed from the beginning for long life and extreme ruggedness. TRACOM's standard buildings are designed for 135 mph wind loading, 40 PSF snow loading, and seismic zone 4.

We manufacture a full line of floor access doors for pedestrian, H20 traffic and airport loading. We fabricate our floor access doors in aluminum, steel (painted or hot dipped galvanized) and stainless steel. We can meet all your needs from ladders and hoists to guide rail brackets and special designs. We have over 50,000 drawings in stock.

JETT Pump & Valve, LLC offers 24/7 Emergency Service and support, all calls will be answered in person by someone from JETT Pump & Valve 24/7