Automation & Control of Electroless Nickel Baths with Walchem
Check out the article HERE on www.pfonline.com about spectrophotometric nickel/pH controller enableing tighter control of the ENi process, resulting in improved product quality.
Is your drinking water safe?
Water Quality: Is My Tap Water Safe to Drink?
The above stated question is frequently asked all over the country. The answer depends on whether you are obtaining water from a plastic bottle, private well or from a public...
Update from JETT Pump & Valve on COVID-19
The current 'Guidance on the Essential Critical Infrastructure Workforce,' from the US Department of Homeland Security (dated March 19th, 2020) as well as Governor Gretchen Whitmer's Executive Order No. 2020-21 (dated March 23rd, 2020)...
Successful Storm Station in Romulus, MI
JETT Pump & Valve contributed basis of design assistance and storm station supply and installation to The InSite Real Estate Industrial Warehouse project discussed in this article published by PEA:
The InSite Real Estate Industrial...
SITHE Chopper Pump in Brownstown, MI
Case Study: Offshore Oil Rig Protects it's People & Equiptment Using the ALL-Test Pro5
Offshore drilling is a high stakes business, and one where safety is a high priority. At any given time, there could be between 110 and 180 people on board an offshore oil rig. Great effort is made by the entire crew – managers, drillers,...
Case Study: Proactive Motor Testing Protects Ethanol Plant
Ethanol has been a clean-burning fuel used in the United States since the 1850s. Ford’s Model T automobile was designed to run on ethanol, and while ethanol was banned during the Prohibition era, it gained traction in the 1970s at a time of...
Case Study: What is 3 Minutes of Motor Testing Worth to You?
The Company:
A motor distributor in the Netherlands provided a 17 Kilowatt, 400-Volt motor to a local hospital in 2015. The hospital rented a portable crane to install the motor onto the roof of the building. The motor is used to operate a fan...
ALL-Test Pro - Tech Tip: How Important is meg-ohm Testing?
ALL-Test Pro - Tech Tip: Overheating Electric Motors
Cla-Val Operator & Maintenance Training
Contact JETT Pump & Valve today to attend!
ALL-TEST Pro AT5 Training Video
Find a GREAT review video for ANYONE who is using the AT5 HERE.
It will answer most of the operational questions surrounding the instrument.
To order your AT5, contact Scott Sturm at scotts@jettpump.com today!
ALL-Test Pro - Tech Tip: Winding Failures in Motors
ALL-Test Pro - Tech Tip: Motor Circuit Analysis Data Analysis Tip
ALL-Test Pro - Tech Tip: Motor & Generator Storage
Case Study: Generating Revenue & Avoiding Motor Failure with ALL-Test AT5
Every successful business works to increase revenue, so that the company can grow and continue to provide better products or services to their customers. Growing companies typically make investments in state-of-the-art tools and equipment so that...
ALL-Test Pro - Tech Tip: Limitation of Insulation to Ground Fault Detection
De-Energized Testing & Motor Circuit Analysis (MCA)™ - What is MCA?™
Motor Circuit Analysis (MCA)™ is a de-energized test method to assess the health of a motor. This method can be initiated from the Motor Control Center (MCC) or directly at the motor. The advantage to testing from the MCC is that the entire...
Why Test Motors?
Because Motors Fail.
Not all winding faults start as ground faults. Instead, they can start as a weakness in the winding insulation system that may eventually fault to ground when the motor stops running.
Motor testing is integral to the...