New Energy Compliant Products

New Energy Compliant Products - Blog & Latest News | JETT Pump & Valve - burks_weinman_energy_standards

Crane Pumps & Systems announces its Department of Energy Compliant Products.  The Weinman® 375 / 575 Series End Suction Pumps, Weinman® 310 / 500 (G&K) Series End Suction Pumps, and Burks® GA & GB Series Pumps have been tested in accordance with, and exceed the requirements of the Energy Conservation Standards for Pumps established by the U.S. Department of Energy.

These pumps met the requirements three years ahead of the 2020 compliance date.  The goal of the new standards is to reduce pump operating costs, the demand on the nation's energy system, and carbon emissions related to power generation.

The Crane Pumps & Systems' test lab was one of the first in the United States to become approved by the Hydraulic Institute, satisfying their requirements to meet the HI 40.6 Methods for Rotodynamic Pump Efficiency Testing standard. This approval indicates that our test laboratory has been audited per the requirements defined by the HI 40.7 Program Guide for Pump Test Laboratory Approval.

 

To learn more about the U.S. DOE Energy Conservation Standard for Clean Water Pumps and the work being done by the Hydraulic Institute to support the regulation, visit: 

http://www.pumps.org/DOE_Rulemaking.aspx

 


 

Is your drinking water safe?

Water Quality: Is My Tap Water Safe to Drink?    The above stated question is frequently asked all over the country.  The answer depends on whether you are obtaining water from a plastic bottle, private well or from a public...

Update from JETT Pump & Valve on COVID-19

The current 'Guidance on the Essential Critical Infrastructure Workforce,' from the US Department of Homeland Security (dated March 19th, 2020) as well as Governor Gretchen Whitmer's Executive Order No. 2020-21 (dated March 23rd, 2020)...

Successful Storm Station in Romulus, MI

JETT Pump & Valve contributed basis of design assistance and storm station supply and installation to The InSite Real Estate Industrial Warehouse project discussed in this article published by PEA: The InSite Real Estate Industrial...

ALL-TEST Pro AT5 Training Video

Find a GREAT review video for ANYONE who is using the AT5 HERE. It will answer most of the operational questions surrounding the instrument.   To order your AT5, contact Scott Sturm at scotts@jettpump.com today!  

Why Test Motors?

Because Motors Fail. Not all winding faults start as ground faults. Instead, they can start as a weakness in the winding insulation system that may eventually fault to ground when the motor stops running. Motor testing is integral to the...
Page: 123 - All