Successful Storm Station in Romulus, MI

JETT Pump & Valve contributed basis of design assistance and storm station supply and installation to The InSite Real Estate Industrial Warehouse project discussed in this article published by PEA:

The InSite Real Estate Industrial Warehouse project consists of a 500,000 SF modern warehouse facility, truck docks, trailer storage and employee parking on approximately 56 acres in Romulus, Wayne County, MI. The site is located on the west side of I-275 and north of Pennsylvania Avenue. The project required an extremely aggressive schedule to meet the tenants’ delivery deadline. The project kicked off with surveying services in mid-March 2016 and the final construction permits were obtained in September 2016. The project had a delivery deadline to the tenant at the end of July 2017.

The project required a collaborative effort between the Wetland Consultant, Traffic Consultant, PEA Brighton Office and PEA Troy Office to meet this deadline. The project had many obstacles to overcome which included wetland permitting, off site road improvements, a County drain crossing and dealing with an extremely flat former agricultural site and shallow storm water outlet. Working around the flat site constraints, shallow storm outlet and wetlands, PEA designed a storm water detention system that included bio-swales, a storm water forebay/detention pond and a pumped storm water outlet to meet the requirements of Wayne County. However, the greatest challenge was during construction.

In order to meet the extremely aggressive project delivery date, non-traditional solutions were needed to keep the project on-track. With site work starting in the fall, main building construction and enclosure had to be completed during the winter. The project required a floor flatness specification for the new user. As such, a stable subgrade and floor base were essential. When the building was enclosed in January, the ground was frozen, and the floor slab was to be installed on non-frozen ground.

The building was heated and the frozen ground began to thaw which created a subgrade that was extremely wet, and unstable. With cold winter conditions and enclosed building, it was evident the soil was not going to dry out with aeration. To solve this problem, PEA recommended performing soil stabilization to modify the wet subgrade soils. This solution consisted of sampling and testing on-site soils, developing a stabilization mix design, and meticulously monitoring the stabilization process. Within seven days, the floor subgrade was stabilized and ready for floor slab construction. If traditional remove and replace was performed, this would have taken about 30 days and cost almost twice as much. The stabilization was completed under budget and kept the project schedule on-track.

To learn more about PEA’s geotechnical engineering capabilities, please contact Daniel Stys, PE, Director of Marketing and Business Development.

 

Congratulations to PEA on a successful project!

And a special thanks to Jacob Sable for his contributions.

 


 

Is your drinking water safe?

Water Quality: Is My Tap Water Safe to Drink?    The above stated question is frequently asked all over the country.  The answer depends on whether you are obtaining water from a plastic bottle, private well or from a public...

Update from JETT Pump & Valve on COVID-19

The current 'Guidance on the Essential Critical Infrastructure Workforce,' from the US Department of Homeland Security (dated March 19th, 2020) as well as Governor Gretchen Whitmer's Executive Order No. 2020-21 (dated March 23rd, 2020)...

ALL-TEST Pro AT5 Training Video

Find a GREAT review video for ANYONE who is using the AT5 HERE. It will answer most of the operational questions surrounding the instrument.   To order your AT5, contact Scott Sturm at scotts@jettpump.com today!  

Why Test Motors?

Because Motors Fail. Not all winding faults start as ground faults. Instead, they can start as a weakness in the winding insulation system that may eventually fault to ground when the motor stops running. Motor testing is integral to the...

NEW Motor Genie® App

  We are pleased to announce that the MOTOR GENIE® - Condition Calculator™ App is now available. The new MOTOR GENIE® - Condition Calculator™ App is a companion to the MOTOR GENIE® motor tester. The App allows...

The SITHE is here!!

Crane Pumps & Systems has unveiled their new chopper pump, the SITHE! Check it out in this video.   For more information call JETT Pump & Valve today at 248-673-2530 or email us at: sales@jettpump.com

NEW BLADE Grinder Pump by Barnes

Crane Pumps & Systems has released a new grinder pump! Check out the new BLADE! Call JETT Pump & Valve today at 248-673-2530 for more information or email: sales@jettpump.com

Crane Pumps & Systems Has A New Certification!

Just Announced: NSF61/ANSI 372 Certification for Weinman & Deming Horizontal Split Case pumps Crane Pumps & Systems has just announced the Weinman & Deming Horizontal Split Case pumps, Weinman End Suction pumps (375/575) and Burks...

What is Cavitation and What Causes It

  Cavitation is the formation and collapsing of cavities or bubbles in a liquid mostly developed in the areas which have relatively low pressure around the pump impeller. It occurs in the absence of the net positive suction head the pump....

Learn the Lingo: Glossary of Pump Terminology

Pumps provide an important role in our everyday lives. Where it is bringing us water or taking away waste, keeping pumps functioning is an important part of our daily society. To help you learn the lingo of the pump and repair world, below is a...

Wipes are Clogging Pipes in Macomb County

Macomb County and it's residents are feeling the costly effects that "flushable" wipes are having on maintenance to their wastewater infrastructure. This flyer has been distributed to some of the community's residents to bring...

Costly Clogging Problem Solved by Barnes SH Pumps

Back in 2011 Oak Hill Estates of Holly, MI was experiencing persistent recurring clogging- multiple times a week! The risk of overflowing the station during peak flow times could lead to heavy fines from the EPA. The lift station’s operator,...

New Energy Compliant Products

Crane Pumps & Systems announces its Department of Energy Compliant Products.  The Weinman® 375 / 575 Series End Suction Pumps, Weinman® 310 / 500 (G&K) Series End Suction Pumps, and Burks® GA & GB...

All About Check Valves

Check valves, also known as one-way or non-return valves, are unlike any other type of valve. They are one of the few self-automated valves that do not require any assistance to open or close - they are able to pass fluid in solely one direction on...

All About Check Valves

Check valves, also known as one-way or non-return valves, are unlike any other type of valve. They are one of the few self-automated valves that do not require any assistance to open or close - they are able to pass fluid in solely one direction on...

Variable Frequency Drives 101

Utilizing pumps on a regular basis can be a costly operation; they can run for hours at a time and require a tremendous amount of power to run. We all know (or might not know) that energy efficiency starts with motor speed control. To keep things...

IWAKI AIR AODD Pumps now at JETT Pump

  JETT Pump & Valve, LLC now proudly distributes IWAKI AIR! Iwaki Air AODD pumps or Air Operated Diaphragm pumps are engineered for maximum utility. They are portable and easy to install, operate, and maintain. Infinitely variable...

How to Read Pump Curves

Pump Curves for Pump Selection 101 For those in the pump industry, learning how to read a pump curve or performance curve can be incredibly useful if not downright necessary. For us here at JETT Pump, one of the ways we apply our knowledge...

What Happens After the Flush

What Happens After the Flush? “Outta sight, outta mind” is the attitude most of us have when flushing a toilet. We don’t want to think about it or ask about it, but someone has to answer it. So what really happens after you...

#TBT JETT Pump Solves Clogging

Costly Clogging Problem Solved by Barnes SH Pumps #TBT Throwback Thursday! Back in 2010 the City of Inkster, MI was experiencing persistent recurring clogging- almost every 48 hours! And sometimes after only ten minutes of being unclogged!! The...

Preventative Motor Testing

JETT Pump & Valve, LLC Adds Preventative Motor Testing Waterford, MI March 1, 2016, JETT Pump & Valve, LLC is pleased to announce that they have added a new manufacturer, ALL-TEST Pro, LLC to their extensive product line. This new...

Walchem Liquidation Sale

Walchem On Sale - Going on NOW! Check out the start of our Walchem Liquidation Sale on eBay! There are some new in box older model metering pumps posted right now, take a look! JETT Pump on eBay    

Learning About Lift Stations

Lift Stations: The Basics JETT Pump & Valve, LLC provides a variety of services for municipal, industrial, and commercial customers. Lift stations are commonly our patients for the services we preform. Most people are not familiar with what a...

7 Deadly Toilet Sins

Don't Flush This! The universe gave us both toilets and trash cans, and each are to be used responsibly! When you flush things down the toilet, they simply don’t just disappear. By doing so, you are allowing it to enter into the...

Welcome to Our New Website!

We've added great new features and updated our content to bring you the most up to date information about our company.  Check back often for updates.